SOC状态对LiNi_(0.5)Mn_(1.5)O_4材料电化学性能的影响Effect of SOC state on the electrochemical properties of LiNi_(0.5)Mn_(1.5)O_4 material
赵玉超;吴汉杰;黄美红;梁兴华;毛杰;
摘要(Abstract):
采用溶胶-凝胶自蔓延燃烧合成法,制备5 V级高电位的镍锰酸锂正极材料.利用X射线衍射仪、扫描电子显微镜(SEM)、能谱仪(EDS)进行表征测试,电化学工作站测试材料的电化学性能,研究尖晶石LiNi_(0.5)Mn_(1.5)O_4材料在不同SOC状态下对电极交流阻抗谱特征的影响.结果表明,LiNi_(0.5)Mn_(1.5)O_4材料是尖晶石结构,样品微观形态为八面体的结构,粒径分布均匀.CV测试表明:LiNi_(0.5)Mn_(1.5)O_4材料放电平台在4.6 V和3.9 V,在SOC为60%~80%时,电池的组合电阻呈现相对比较低的状态,得到放电过程电化学特征与SOC的关系.
关键词(KeyWords): SOC;LiNi0.5Mn1.5O4;电化学性能;交流阻抗;尖晶石
基金项目(Foundation): 广西汽车零部件与整车技术重点实验室自主研究课题(15-A-03-01);广西汽车零部件与整车技术重点实验室开放课题(2015KFZD02)资助;; 广西科技大学研究生教育创新计划项目(GKYC201617)
作者(Author): 赵玉超;吴汉杰;黄美红;梁兴华;毛杰;
Email:
DOI: 10.16375/j.cnki.cn45-1395/t.2017.01.018
参考文献(References):
- [1]代冬梅.前驱体的处理对锂离子电池正极材料LiMn1.5Ni0.5O4电性能的影响[D].新乡:河南师范大学,2010.
- [2]FRIDMAN K,SHARABI R,ELAZARI R,et al.A new advanced lithium ion battery:combination of high performance amorphous columnar silicon thin film anode,5V LiNi0.5Mn1.5O4spinel cathode and fluoroethylene carbonate-based electrolyte solution[J].Electrochemistry Communications,2013(33):31-34.
- [3]庞佩佩,唐致远,袁秀兰,等.5V LiMn1.5Ni0.5O4正极材料掺杂改性研究[J].电池工业,2010,15(3):160-164.
- [4]梁兴华,史琳,刘于斯,等.高电位LiMn1.5Ni0.5O4正极材料的性能研究[J].广西科技大学学报,2014,25(1):37-39.
- [5]WEIDNER J W,TIMMERMAN P.Effect of proton diffusion,electron conductivity,and charge-transfer resistance on nickel hydroxide discharge curves[J].Journal of the Electrochemical Society,1994,141(2):346-351.
- [6]OU S,WANG S L,ZHI Q,et al.Synthesis of spinel LiMn1.5Ni0.5O4cathode material with excellent cycle stability using urea-based solgel method[J].Materials Letters,2012,89(15):251-253.
- [7]YI C,HUANG S Z,SHE F S,et al.Facile synthesis of well-shaped spinel LiMn1.5Ni0.5O4nanoparticles as cathode materials for lithium ion batteries[J].RSC Advances,2016,6(4):2785-2792.
- [8]梁兴华,曾帅波,刘于斯,等.不同配比的复合导电剂对LMO锂电池性能的影响[J].广西工学院学报,2013,24(3):58-61.
- [9]WANG Y X,HUANG L,SUN L C,et al.Facile synthesis of a interleaved expanded graphite-embedded sulphur nanocomposite as cathode of Li-S batteries with excellent lithium storage performance[J].Journal of Materials Chemistry,2012,22(11):4744-4750.
- [10]ZHANG S S.Role of LiNO3in rechargeable lithium/sulfur battery[J].Electrochim Acta,2012,70(6):344-348.
- [11]LI Q,ZHANG Z,ZHANG K,et al.A simple synthesis of hollow carbon nanofiber-sulfur composite via mixed-solvent process for lithium-sulfur batteries[J].Journal of Power Sources,2014,256(3):137-144.
- [12]CHANDIRAN A K,ABDI J M,NAZEERUDDIN M K,et al.Analysis of electron transfer properties of ZnO and TiO2photoanodes for dye-sensitized solar cells[J].ACS Nano,2014,8(3):2261-2268.
- [13]ZHANG N,YANG T,LANG Y,et al.A facile method to prepare hybrid LiMn1.5Ni0.5O4/C with enhanced rate performance[J].Journal of Alloys and Compounds,2010,509(9):3783-3786.
- [14]YI T F,XIE Y,ZHU Y R,et al.High rate micron-sized niobium-doped LiMn1.5Ni0.5O4as ultra high power positive-electrode material for lithium-ion batteries[J].Journal of Power Sources,2012,211(95):59-65.
- [15]ARIRA P,POPOV B N,WHITE R E,et al.Electrochemical investigations of cobalt-doped LiMn2O4as cathode material for lithiumion batteries[J].Electrochem Soc,1998,145(3):807-815.
- [16]HJELM A K,LINDBERGH G.Experimental and theoretical analysis of LiMn2O4cathodes for use in rechargeable lithium batteries by electrochemical impedance spectroscopy(EIS)[J].Electrochimica Acta,2002,47(11):1747-1759.
文章评论(Comment):
|
||||||||||||||||||
|